# Connecting your till system and Verofy® Move

<p class="callout info">Remember - for this type of integration your till system and Verofy® Move need to be connected to the **same network**. Check this before getting started!</p>

1\. From the Verofy® Move home screen, select the **Verofy Connect** application.

![](https://verofy-2-knowledge-base-public.s3.amazonaws.com/uploads/images/gallery/2025-11/embedded-image-0lzbhxqu.png)

2\. The application will synchronise automatically. Once done, press **Get started** .

![](https://verofy-2-knowledge-base-public.s3.amazonaws.com/uploads/images/gallery/2025-11/embedded-image-enmyo9hv.png)

3\. Your card machine will then request you input the IP address for your Verofy® Move into the required field on your till system. Once this has been completed, press **Pair device** .

![](https://verofy-2-knowledge-base-public.s3.amazonaws.com/uploads/images/gallery/2025-11/embedded-image-fjuj8bgt.png)

4\. Your till system will ask you to enter the four-digit pairing code, please use the one that is displayed on your Verofy® Move.

![](https://verofy-2-knowledge-base-public.s3.amazonaws.com/uploads/images/gallery/2025-10/embedded-image-7gqihivt.png)

5\. As soon as the pairing is complete, your Verofy® Move will load the integrated home screen and you're ready to take payments.

![image.png](https://verofy-2-knowledge-base-public.s3.amazonaws.com/uploads/images/gallery/2025-11/scaled-1680-/onLimage.png)